The above video goes away if you are a member and logged in, so log in now!
Installer expertise needed
Installer expertise needed –
Ok ive done v4 magic 3.1 before but this one is quite odd. First the owner of the ps2 had a neo 2.2. installed and wanted me to remove it then add a 3.1. I trusted him so I did not test the system prior to modding it. Ok now, after its been done the eject tray would not want to come out due to the spindle not wanting to detach hard enough from the white magnet. Without the magnet, it would move but sluggishly. As you keep pressing eject it seems the tray would move faster in increments everytime thereafter you press eject. I redid my dvd points and still no luck. It is possible that it is a mistake on my part but would detaching the neo2.2 have this effect on the tray? I'm tryin to contact the owner of the system but I'm afraid he'll tell me that it was working properly prior to me modding it. Any suggestions?
Edit: Problem fixed! Apparently, the person who put in the neo cut a track. I resoldered the connection and now its fine.
take the chip out then see what happens! If all is good, do it again!