The above video goes away if you are a member and logged in, so log in now!
An interesting thing with the v2.0 modbos.... the first batch that were released for sale worked ok in any of the models (you will know if it's one of these as they were packaged with green diode fix boards). Then they initiated a change to the firmware, and this curent batch do not work on v3-7, they will give black screen , no video, however they will work on v9-12 but will give a corrupted Playstation 2 logo. These ones have a white diode fix board packaged with them. This information is accurate and had I known about it previously would have saved me a lot of time and angst.
have the 2.1's fixed this problem
Yes the 2.1's fixed the compatibility issues.
Can anyone confirm if the 2.0/2.1 modbo's fix the config screen problem the modbo 1.1/1.2's had? (can you change the settings and it works correctly?)
also, can anyone confirm if the 1.68 firmware works on them as well?
I have to reset the console 2 - 3 times to make the chip work (even disable doesn't work) but after that, everything works.
Is there any hardware issue with the V2.0 or is it a firmware problem?
Try placing your chip elswhere. This has help me when i have the same prob.