I need some serious help- nothin works!!!
i got a magic 3.5 and installed on tues. it Played da exact same as always but wouldn't any game backups.
On closer inspection of my solder work i thought i saw a bad connection to gnd, z and reset so i resoldered them. By any1's standard i made a balls of solderin gnd and left my iron over it too long but as there are no other points near it i said what can possibly go wrong. As well i only got a 12v iron so its not too hot.
i then inspected my bios clip and noticed 3 pins were bent upwards so i straightened em and put everything back together thinkin this time it'll work.
But now on bootup i get nothin- My fan works and the drive opens but there's nothin goin into my tv!!
Is my ps2 burnt out?? Can it be fixed??
I didn't think it was possible to do so by puttin too much solder onto gnd. There are no burn marks on on it.
I've tried bootin it wit no bios clip on and still nothin!!
Plaease help cas my brother is gonna bust me up if i dont fix it