I am new and CONFUSED
I am new here and I hope I can get help
I have bought a DMS3 Mod for my PS2, but I have a big problem.
I have the
I looked and I determined that it is a version 1 , but when I went to the DMS page to get the diagrams the board doesnt look like mine... and I checked the Version 2 diagram it looked exactly like my board... :wow: So I dont know if I should follow the diagrams for the version 1 or should I trust the Diagram 2..
Have you guys heard about this??
If so which one should I use???
Thanks in advance for any help
Loco, so your new huh? I would worry less right now about the version of your console and more about your soldering ability. Versions 0-4 are pretty advanced stuff, the dvd controller legs are a total bitch if you havent done them before. I can't remember exactly which version yours is but good luck anyway.
Dont drink and mod :)
Do a search for soldering tips and tricks.
If your advanced already get ready to replace that laser sometime soon too.
be very careful with ur soldering. those bios legs etc are very small. make sure u have the right size wire, solder and soldering iron and try keep it as neat as possible (glue very important) - alot of wires all going the same direction.
here is a very good website for soldering tips for ps2:
Thanks for the replies m8s
I guess I will just buy me a newer version of the PS2 Since I only soldered the PS1 and some cellphone leds
These legs are waaaaaay small!!
I will mess this up!!
I will just buy a newer version off ebay!
Good luck with the newer version! :)
This ps2 that you have is probably one of the first revisions of the v2...
I suggest you look for a v7 by the way, you'll get almost no modchip install problems, unlike the v9..
I just got back from the pawnshop
I bought a V7 for just 100 bucks!
I will work on this one now!