Printable View
I have got a PS2 SCPH-50004 PAL, that I have tryed to mod with a DMS3 v9. When I turn power ON, nothing happens? RESET button is red.When I press EJECT buttun it starts blinking blue, but nothing else.No boot up, just black scren. When I press the RESET button once, the EJECT button stops blinking, and is lights blue. If I hold the reset button 1 sec. or more, I can't do anything else. NO BOOT SCREEN AT ALL:cry:
Have I ****ed up my PS2?
PLEASE HELP ME
/Toppermand from Denmark!
Apparently, you went wrong somewhere..
Doesn't the Reset light come on at all? Not even green?
sorry I missed that. YES the reset light becomes green, when i press on the Reset OR Eject button. But then nothing happens.Quote:
Originally posted by Blessed
Apparently, you went wrong somewhere..
Doesn't the Reset light come on at all? Not even green?
Definately a ruined LA or BA chip.. (Whatever they're called in V9..)
Does the Eject light come on? or does it stay off?
1. Power up--> Reset stays redQuote:
Originally posted by Blessed
Definately a ruined LA or BA chip.. (Whatever they're called in V9..)
Does the Eject light come on? or does it stay off?
2. Press on Reset-->Reset become green & Eject becomes blue
3. Press on Eject-->blinking blue & opens drive( there was a fault on the 8 wires on the back, now working, I hope). But still NO picture/bootmenu. Could it be the 3,3volt wire that is to thin?
Yes I was going to suggest testing / checking your CD/DVD controller points these usually intefere with eject if wired wrong.
If you are getting black screens though and no picture or sound you may have damaged something when wireing poorly.
You can try using thicker wire on gnd and pwr, keeping wires short and close to the MB but I doubt that will help much.
I suggest if teh above does not work - back out of the install and then check to see if the station unmodded still works??