Hi!I have a V7 pal console with mxl2 inside and suddenly the disc doesn't spin!I can see the lens going up and down but the disc doesn't spin!What's the problem?
Thanks in advance!
|
|
|
|
Would you like to get all the new info from
PSX-Scene in your email each day?
Want to learn more about the team keeping you up to date with the latest scene news?
Read about them now! Check out our Developer bios, too! | ||
|
|
Hi!I have a V7 pal console with mxl2 inside and suddenly the disc doesn't spin!I can see the lens going up and down but the disc doesn't spin!What's the problem?
Thanks in advance!
Did you play around with the DVD/CD drive, if not then check the mod installation, wires, soldered points, everything.
I've ruined a few drives by playing around with it too much.
try changing the laser.
i also have a ver7 but a magic2 chip. My drive did the exact same thing and found a loose wire. after i resolder it, it now works. so chekc that.
The installation was good!I removed the mxl2 and still nothing,the cd/dvd doesn't spin!Which chip is responsible for this?Is the BA chip responsible for spining?
check the BA6XXXX (but very rare it blows up) or else you messed with the pots
al
How do i test the BA chip..i got the same probs ona v10
From boot regardless of inserted media or DMS3 on/off
Dms seems ok allows itself to be flashed from memory card
small skid from lazer head on slide pole..moves bout half an inch
drive dosent turn at all
browser appears
no disk icon in browser just memory card
I think if the pin number 8 is grounded, it means that the chip is bad. Look around on the forums, it is in here somewhere. Check fuses around the chip, if one of those are dead, it could be the chip, or maybe just the fuse.
Good luck.
Your prob is a blow fuse.
check the PS 12 and PS 13
| « Previous Thread | Next Thread » |