help rumble not workink
hello, i seem to have a problem with my v5 pal, i installed an messiah every thing loads fine but my rumble on my pads are not working the pads are fine as ive tried them on my mates ps2 and i,ve even replaced the joy pad cable that connects to the mother board so its not the cable so i think its some thing on the mother board. if any one know how to find or solve this problem can you let me know asap.....CHEERS.
Check one of the fuses near where your fan is plugged into the mainboard. Don't know about the PAL units, but the U.S. NTSC ones are around that area. Should be a little black box with a number on top of it. More than likely a "S7", but could be marked "30".
If anyone knows this is wrong, please feel free to correct me on this one. I'm not familiar with PAL consoles.
Hope it helps!
thanks, i did have feeling it was a fuse just couldnt be bothered to open the ps2 until i 100percent knew what it was. thanks for the info i shall change it with an old fuse from an old psx.
I can provide a fuse if you want one, but yehj it's a fuse near the fan plug