Help ( QUICK QUESTION )
I have *FINALLY* got around to start modding my PS2, had the bloody chip for about 2 months now but havnt done it yet , and to make matters worse we have had a power cut all day so I opened up my ps2 and now it has to just lie there in wait till tommorow...but how do I remove the cables as shown in the pic.... I have removed more or less everything else...
(btw thats someone elses pic, i just circled the connectors)
btw im installing a dms3 in a V5
any other help wouls also be appriciated...
the little brown tabs are locking clips just lift them up and remove the ribbon they are on a hinge so be careful not to damage them they dont come off the board just flip up.
also make sure each cable is inserted correctly before closing again otherwise you could create a short and damage components.
ps: here's the biggest tip there is take your time :)
OMG that was so easy , why didnt i figure that out. Thx for the help , I see what you mean about being careful when reattatching... My worst fear is I put it all back together and it doesnt work..
But I am out of daylight again, Damn it, So will finish mod tommorow... Will post piccies when done.