Help, New PS2 39001 don't boot dvd

Azoko · 08-15-2003,08:37 AM

Hi all,

I'm new in this forum, but a week ago i had read every post.
Ok, the description and symptom are:

PS2 39001 V7 New 7/1/03
Magic 3.1 red PCB (orig)

I can BOOT PS1 and PS2 games Music cd, on CD, CDR, CD-RW. ALL on CD

I can't BOOT any DVD.

A week ago can Boot DVD and DVdR, but 4 or 5 day ago began to hang and now won't boot any dvd.

I had tried, cleaning the lazer lens, azimuth adjust, white gear on back (try elevation), pot for voltage lazer lens adjust, check every point connection over mainboard of M3 for possible unconnection, are all ok.

I can't return or carry to service in which bought, this is 1100 miles from my house.

Any suggestion will be appreciate.

thank you in advance.
regards
Azoko

Azoko · 08-15-2003,08:31 PM

any idea?

**bighap** · 08-15-2003,08:34 PM

Sounds like a wire has come loose. Open it up and check it out.

Relayer · 08-15-2003,08:36 PM

Check all your DVD/CD decoder points, you may have one in the wrong spot. Their the points on the bottom of the board and two on the top of the board very close to the large IC.
Its doubtfull that your laser is out of kilter and you should return all the settings back to the way they were.
Also, will it boot original DVD based games???
Regards,
Relayer

**bighap** · 08-15-2003,08:37 PM

Dvds worked before so something had to come loose.

Azoko · 08-15-2003,08:57 PM

Thank you all,

Ok Bighap, I have checked every point from M3 Chip to the mainboard with my ohm meter, this is all right. The points are the corrects.

Yes, the DVDs worked ok before. Could it be that the lazer lent is dead yet, with only a week of work?

Relayer, the points are ok, and they have continuity from M3 to mainboard.

regards
Azoko

Azoko · 08-16-2003,11:04 PM

Hey, have the masters any idea?

MegaManX · 08-17-2003,03:24 AM

Idea...simple, restart! Remove the chip...and see if it boots DVD's up now, I suspect it probably will. And be on the look out for solder balls...they may be small but can cause chaos.

fooniman · 08-17-2003,04:07 AM

boot the ps2 with the chip off (hold reset till browser screen) and then try an original DVD Game... see what happens, post the result, if it FAILS, then yes, it's your laser.

**Don6323** · 08-17-2003,12:19 PM

You need to ck the W wire. I it will boot PS2 cdr games then The dvd controler wires and bios are probably ok but the W point may be bad or damaged.

User Tag List

Thread: Help, New PS2 39001 don't boot dvd

Tweet

LinkBack

Thread Tools

Display


	Would you like to get all the new info from PSX-Scene in your email each day? Subscribe to our Daily Digest! Want to learn more about the team keeping you up to date with the latest scene news? Read about them now! Check out our Developer bios, too!