The above video goes away if you are a member and logged in, so log in now!
HELP: messiah and PS2 30004 v3 PAL :(
HELP: messiah and PS2 30004 v3 PAL :( –
I have the following prob when installing :
When Messiah is installed - my Ps2 is successfully boots PSone backups. But any PS2 backup or original does not boot - goes to black screen....
When i unsolder all wires except needed for PSOne - it does play PSone backups and PS2 originals.
So, chip itself should be ok... What am i doing wrong???
May be i missed some point??
Are we talking Messiah or Messiah2 here?
I have seen this with Messiah - usually means some of the points were connected poorly or iincorrectly and a check of the points and continuity would fix the problem - with the Messiah2 and most other new chips - they don't tend to work at all unless all is connected correct.
Otherwise I have seen also that with these older stations the laser is just not capable of reading the copied media and as such needs to be tweaked and eventually replaced.
can someone tell me if a game is over than 700mb what gone i do? must i have a dvd then?