The above video goes away if you are a member and logged in, so log in now!
Help me out installing a magic V in a V7
Help me out installing a magic V in a V7 –
i'm new to the ps2 scene i've been around the xbox scene for a bit. i got xbox hacking mastered so i wanted to dive into ps2. i put in the magic v, but in the picture i was supplied at modchipstore.com the a point arrow looks misleading (i dont know what it's pointing to) so i wanted to know if you guys could help me out with a link or something. i tried to put it where it looks like its pointing to but the ps2 boots up but no picture. I am using too small cable for 3.3 though so i'll change it to a bigger gauge. i have a larger one for ground, should i use the higher gauge for any of the other points???
you only need thicker wire for ground and power. test your points with a multimeter to check em.
thanx, i also read i should route the r wire at the bottom of the mobo so that there will be no interference, i'll try that too
You solder the A point to the side of that little black resister
like up under it or just on the side?