Printable View
according to the diagram, the point "S" is at the bottom side. when i open my ps2 v1, look at the board, turn it upside down but i can't see the point "S" as indicated in the diagram. in fact, it's not really a bottom side, it's a double-board connecting to each other by the four big soldering-points.
should i de-solder these 4 points to separate the two boards?
where is the "S"?
thanks for your help.
yeah, the original points are below the main board and you have to de-solder the 4 font points to split the boards.... but you can use this alternative points too :)
so the point "S" is "clk" also?Quote:
Originally posted by qwm
yeah, the original points are below the main board and you have to de-solder the 4 font points to split the boards.... but you can use this alternative points too :)
by the way, really appreciate your help.
you only need "S" point, the clk point goes for M2.... You can use the "S" point from Novachip/Origachip too.
im sorry, what are you saying?Quote:
Originally posted by qwm
you only need "S" point, the clk point goes for M2.... You can use the "S" point from Novachip/Origachip too.
what's M2, Novachip/Origachip?
i cant find "S" on the picture you posted.
alt-scex is the alt s point
thanksQuote:
Originally posted by karia
alt-scex is the alt s point
np :)
m2 = messiah 2 and novachip/origachip are other mods, that you can use their diagrams to get the same soldering point, is what he meant.Quote:
Originally posted by RotKT
im sorry, what are you saying?
what's M2, Novachip/Origachip?
i cant find "S" on the picture you posted.