H20 + V9 + Romeo mod....HELP

[zetex]

Hi,

just installed a h20 mod into a v9 and also done the romeo mod....

i have gone to power up the ps2 and the red light comes on but when i goto press it nothing....

if i press the eject button the blue eject light starts to flash and the red light stays on and still nothing....

any ideas what may be causing this...its driving me mad....

Thanks alot

Z

[crans]

bridging or bad chip as first batch of H20+ are falutly. Alos chek fuses ps14 wuld be the first one i wuld chek

[zetex]

right i'm starting to get somewhere...

thanks alot for the reply...

i got the reset and z wire on the wrong pads... had to lower them down one...

now the machine comes on but no video and when i put a disc in it spins really fast and when i press eject the disc does'nt stop spinning before the tray opens...

any ideas anyone...

Thanks alot

Z

[levin]

check if you bridged the bios area
the bit where you solder the legz of the chip

[zetex]

removed the chip and resolder the leg 17 on the BA chip and removed the remeo mod.

basically restored it back to the way it was originally..

now its normal was nearly..

switch on the machine boots and press the eject button tray opens put original disc in and close tray...

the disc just spins and spins... and just gets faster and faster...

any ideas what may be faulty, where should i start..

Thanks Alot

Z