H20 v10 question

**nellj** · 09-26-2005,11:58 AM

I have a v10 ntsc ps2 and I just installed the chip, all points are good but when I tiurn the power on The eject button just blinks. My question is, in the diagram it says to use all points except j&k but there is another point that is not being used point "A" do I use this or do I check for some other issue. How thick of a guage wire does GND and 5V have to be?

**villasg** · 09-26-2005,01:24 PM

You have bridge(s) in cd/dvd controller (a,b,g,h,i)

**nellj** · 09-26-2005,01:32 PM

Are you asking if I have a bridged connection or suggesting that I bridge the connections? if so which one (a+b) here's the link to the diagram I'm following http://d-vices.com/subzero/h2o-1011.jpg

Originally Posted by villasg

You have bridge(s) in cd/dvd controller (a,b,g,h,i)

**villasg** · 09-26-2005,01:38 PM

I think have bridge in the cd/dvd controller or in the alt points .
Check with a multimeter the points.

**nellj** · 09-26-2005,02:20 PM

so is there a "a" point I am supposed to solder if so where, I'm not seeing it on the diagram

**GTZ** · 09-26-2005,04:18 PM

Says here that there's an 'A' connection for Version 10.
I'd probably go with the 'A' connection point from the Crystal diagram for Ver10.
Same point on the Magic 5K6.

Cheers,
GTZ

**nellj** · 09-26-2005,05:57 PM

nope that doesn't work, I just get a scrambled picture when I use that "A" point. What gauge of wire should I use for the GND and 5V is 30 too fine?

**dungbeetle46** · 09-26-2005,08:08 PM

this is the A point
30 is fine for ground and power if very short otherwise go thicker to around 22

User Tag List

Thread: H20 v10 question

Tweet

LinkBack

Thread Tools

Display


	Would you like to get all the new info from PSX-Scene in your email each day? Subscribe to our Daily Digest! Want to learn more about the team keeping you up to date with the latest scene news? Read about them now! Check out our Developer bios, too!