H20 Problem with v10 - Diagrams not correct??
Hi!
I tried to install my first H20 today using this diagram
http://d-vices.com/subzero/h2o-1011.jpg
It didnt work at all, RSOD. I checked all points same stuff,
then i looked at the DVD wires, and the H20 use 1 less wire than every other chip i compared to (the A point is missing)
So i used same wires, just removed the H20 and attached a DUO and it worked so my wiring was not faulty.
H20 diagrams on V10 missing a point?
Or h20 chip dont work good on v10?
