GH-019 Video Signal Problem

After a wrong wiring on my GH-019 board
by connecting the 3,45V point to the ground
instead of the PAL/NTSC point to ground,
(i saw that after testing the machine) the ps2
stopped giving a video signal.
Eject button refuses to turn on and the ps2 won't do
anything but reset after pressing the reset button.
No picture no nothing.

I corrected the wiring, removed the wiring along with the
messiah2 but still the same problem.
Have you got any ideas?
Do you think there may be a fuse or something worse?

Please help.

Regards,
PALLiS

If you drive the 3.45v to ground then make a short and possible have blow some items ( maybe only a fuse ).
Check ps14 , ps8 , ps1

Have you got an ICQ UIN???
Mine is 74044039

Is ps14 confirmed

The fuse(s) protecting the voltage regulator driving that 3.45 circuit will have blown. The fuses diagram in the FAQ will help there.