Printable View
I have it installed but wondering if i should take it off??
I havent turned the machine on yet till i figure out which fix to do.
Doesnt look like the foundmy fix is any good. Im not sure
Im not getting the right tracking readings after the install
Your suppose to get 37.5 Ohms on both
I get 37.4 on 1 . - Originally was 39
and 34.0 on the other - Not sure was it was originall. never checked this one.
original should have been 30k ohms, if your getting 39 and 34 you have major problem. I used foundmy fix on several v12's all read 37.5k ohms after the install. Sounds like you go tthe SMT resistors too hot and fried them.
37.4 is fine, you can get until +/- 5%, if the resistors are good, you should get +/- 1% only.Quote:
Originally Posted by mollar
The problem lies on the 2nd one. 34 is too low. Remove the smd resistor with care on 2nd one and check the original value there.
Gradius
I took the low reading one off
Re cap now is:
1st one is 39 Ohms and with the resistor is 37.3
2nd one is 35.7 and with the resistor is 34.3
Now what am i suppose to do ???????
This machine is brand new and i had it on for about 1 minute just to make sure it works before i took it apart.
are you in the US? PM me
I took the foundmy fix off and put sommones fix on.
Everythings working so far
thanks anyways
I'm unable to get any reply from Terry, is he on vacation, trip or something ?
Gradius
Ive emailed him but got no responses for over a week.
could be away...
From site:
"Update: Jan 2, 2005
- If you recently placed an order it should of shipped out already!
- We will be checking our email, but no shipments will be happening until 1 week from now!
- Since we are not going to be shipping out orders, we have giving a break on pricing, so if you order something do not expect it shipped out until Jan 10th, sorry for any inconvience!"
I done an order (PSTwo fix) on Jan 1, but I dunno if it was shipped or not. :(
I just want to confirm that.
Anyway, this all can sounds offtopic... oh well.
Gradius