The above video goes away if you are a member and logged in, so log in now!
flashing green 10secs after bootup
flashing green 10secs after bootup –
roughly 10secs after boot up, the screen image would dissappear and the LED would flash green. only powering off the toggle switch would stop it. trying this again would lead straight to the flashing green. so i was thinking a heating issue. anyone know what could be the cause of this? i didnt test this system out before hand but figured the seal was still intact so there were no problems. ive removed the duo2se that i was trying to put in, its still sitting on the board, but all wires have been removed from their respective points and taped up. only connection now is gnd which makes no difference. i have retouched the legs and gone over the bios 5x with my flux remover/toothbrush/shaving brush.
any tips would be greatly appreciated.