DMS3 V4 Problem

dduck · 12-29-2003,11:54 PM

I installed the DMS3 and the cd/dvd points were a pain. I have something wrong because backups are not loading, but when i load a real game i get the ps2 logo ut then it hangs. any advice??

madskillz199 · 12-30-2003,12:07 AM

you should have gotten a nice simple flip top for your v4, like i did!

**madisonmods** · 12-30-2003,12:45 PM

Recheck all of your points. Make sure D and E are laid flat and taped or glued to the board. I would guess the problem is in the controller points. Did you use the vias or the controller chip legs?

**loy** · 12-30-2003,12:55 PM

check around your bios get origs working first also should remove o-w and redo them

dduck · 12-30-2003,04:28 PM

I removed the DMS3 and is working now, so I guess it must be some bad connection, I should have tried disabling the modchip before I removed them. AQs the the location I used the Controller pins, I could not get the vias to get solder on them.

**loy** · 12-30-2003,04:30 PM

heat the vias add sodler to them

dduck · 12-30-2003,08:16 PM

I tried doing that, I soldered to vias before and had never had this problem I try heating it up and the solder just balls up on my soldering iron. Was thingking of adding a bit of flux. Does anyone know what are the chances of getting a v5 - v7 refurbished at eb or gamestop?

User Tag List

Thread: DMS3 V4 Problem

Tweet

LinkBack

Thread Tools

Display


	Would you like to get all the new info from PSX-Scene in your email each day? Subscribe to our Daily Digest! Want to learn more about the team keeping you up to date with the latest scene news? Read about them now! Check out our Developer bios, too!