The above video goes away if you are a member and logged in, so log in now!
Dms3+ P-W –
i cant get theses wires ta stick im using flux solder all my other points sticked w/ ease i wanna know is how do u get P-W points ta stick thx in advance
Are these the VIA points on the back of the board? What are you soldering to on the PS2 board?
yes there tha back of tha board im tryin ta solder em w/ flux solder but there not sticking to tha board
you need to lightly scrape the points with a razor blade so you remove the covering on them. then solder the point, tin the wire, and then solder them together.
Originally Posted by Thinkdiff
If your using Kynar brand wire you could just insert the ends of the wire into the holes on the board for connections P thru W and let the solder dribble down into and around the point. This is how I connected these points and it was a piece of cake. Also as others have said here, scrape gently the surface of these points in order to get a good clean surface for the solder to adhere to.
Originally Posted by TerrMaster