The above video goes away if you are a member and logged in, so log in now!
DMS3 and DVD-R problem (laser on V4)
DMS3 and DVD-R problem (laser on V4) –
I have a PAL V4 GAP (GH-014) and a new laser green 400C inside.
I can read everything but not DVD-R Verbatim.
So i tried an old laser 400A (only DVD lens is ok 737 ohms) and surprise every DVD Games boots.
I tried to adjust the DVD pot to the laser 400C and still no DVD-R boots works. Original ohms value for the laser 400C are :
CD POT : 1288 ohms / DVD POT : 1129 ohms
I have exactly the same problem on my V4 (GH-010)
Could somebody help me ?
PAL V4 GAP (GH-014) DMS3 V2 Firmware 1.8
PAL V4 GAP (GH-010) DMS3 V2 Firmware 1.8
Try adjusting the laser azimuth.
Thanks Charlie i will try just now
Tell me just if i should let the laser 400C (DVD spot) around 737 ohms before Laser Azimuth Adjustment ?
I love you Charlie it works and dvd spot is at about 750 ohms.
Last edited by xim2; 12-02-2003 at 07:56 AM.
stupid ?, but what tool did you use to test the pots? Im gonna try and adjust mine soon.