Disc Won't Spin, weird noises woes!

Heya, I posted about my problems and whatnot previously. Turns out it wasn't a dead LA chip or anything, I undid the Romeo mod and it fixed all my issues... to an extent.

Now this is the problem... the disc refuses to spin.

When I put the disc in, the laser attempts to read it and the laser mounts lift the disc up against the white plastic disc magnet thingy, but it doesn't spin. Not only that, it makes an odd noise.

Any solutions? I've prodded through all my points with a multimeter and shinizzle and there don't seem to be any bridges....

Thanks in advance :)

It still very well could be an LA issue. When the romeo Mod was done, Is there any chance the pad on Pin 17 was bridged to the pad of pin 18? I had one that I repaired and that that was the problem.

Check Fuses as well, sounds like you may have blow a few (PS11, PS8, PS10)

Double checked for any bridges, there weren't any bridges on the LA chip... I had a look at the disc drive as it starts up, when you turn it on, the Laser blinks for a second, and then stops. Any ideas?