i have some questions for u guys out here
my BA58 chip was blown and after replacing it with a new one now the tray comes out and the screen is good
my disc is not spinning??
i check my fuses, all seems well but i noticed there are 4 small capacitors(grey in color) directly below the BA chip,
the one furthest away from the BA chip have a very small resistance value when i measure it (around 590ohms)
while for normal ok board it should be around 817ohms(noted that i did the measurement without connecting the board to the base)
anyone can help to explain what might be the reason??
thanx alot guys!!!