I recommend the O2 os for the o2 chip. I recommend 22 awg wire for the pwr and gnd points and 30 awg for the rest. Since your in the UK use the SWG equivalent wire. There are 2 pwr points for the O2 chip which since you have a v4 use the 5v point. I also recommend some flux and a desoldering braid and .032 rosin core solder is good. Practice on an old broken pc motherboard. Use flashman when installing the chip. Use a saftey razorblade with blue tack when installing on thing legs. Use double sided electrical tape to mount the chip and to hold down the wires. You can use a glue gun to hold down the wires but not to hold the chip down. I hope this helps.
Last edited by messiahfan2003; 12-14-2004 at 07:24 PM.
Reason: some editing
scph-50001/n v9 matrix infinity fw: 1.91
AMD Opteron 165 Powered!
Burner: NEC ND-3550 v1.Y6 RPC1
Next Consoles: PS3 60 GB and PSP Entertainment Pack