bridge joints or NOT? Need help! Now with PICS
Last night i was putting together wires as im still waiting for my chip. As i was soldering P,O,N,M bios wires i got a bridge which i think was on pin 8 and got spread to pin 11, after about an hour of cleaning up the bridges i used a 100x mag to examine the joints and they look to be clean but i still get a reading with the Vmeter as if there is still a connection, not sure if they are bridged or as part of the internal chip they are crossed !
The pins in ? are Going from left upper portions of the bios, where the P,O,N,M are ie P wire is 2 and M is 8.
I get Positive readings for a connection on pins