The above video goes away if you are a member and logged in, so log in now!
|
| |
Would you like to get all the new info from PSX-Scene in your email each day?
| |
|
-
12-26-2002,03:32 PM
Check to make sure all of your cd/dvd controller pins are still soldered to the motherboard. I had a v4 that had a bridge and when i removed the bridge I had also removed the solder that attached the pin to the board. I just resoldered the pin onto the board and had graphics again.
-
12-26-2002,03:42 PM
Originally posted by charlie_ps2
A damaged component might be where you've soldered to the end of a resistor or capacitor and have damaged it through excess heat. You'd recognise that through distortion.
how do you test for a damaged cap with a dmm?
-
12-26-2002,04:21 PM
Pin?? Aren“t that pads by the cd/dvd controller? They cant get detached, can they??
-
12-26-2002,05:52 PM
the dvd points of course they can to much heat lefts them
seperates them from from the tracks this will also coz black screen
cheers
old crow builder
pic programmer
ps3 jap, 320hhd online
ps2 pal v9 dms3 offline
ps2 pal slim dms4 offline
Australian based mod installer and repairer, any inquiries
email me northern_console_repairs@hotmail.com
Now unbricking wii consoles at a low cost
-
12-26-2002,07:16 PM
They are pins on a V4 Ferid, or you can use vias on the underside. You are correct in later versions v5 onwards there are pads to solder to instead.
PR
-
12-26-2002,08:22 PM
ohh i forgot what model it was
are the vias ok there still there havent goe on ya??
cheers
old crow builder
pic programmer
ps3 jap, 320hhd online
ps2 pal v9 dms3 offline
ps2 pal slim dms4 offline
Australian based mod installer and repairer, any inquiries
email me northern_console_repairs@hotmail.com
Now unbricking wii consoles at a low cost
-
12-27-2002,02:23 AM
They havn“t disapeared I think. I“ll check it to be sure, if the pads are still there..
-
v5 –
12-27-2002,05:11 AM
I got the same with version 5, I think my bios D 221 040 248 is dmaged thats why its alwasy showing black screen.
Where Can I buy a bios ?
-
Re: v5 –
12-27-2002,07:49 AM
old crow builder
pic programmer
ps3 jap, 320hhd online
ps2 pal v9 dms3 offline
ps2 pal slim dms4 offline
Australian based mod installer and repairer, any inquiries
email me northern_console_repairs@hotmail.com
Now unbricking wii consoles at a low cost
-
Re: v5 –
12-27-2002,04:17 PM
Originally posted by ITMASTER
I got the same with version 5, I think my bios D 221 040 248 is dmaged thats why its alwasy showing black screen.
Where Can I buy a bios ?
You can't. Best bet is to have a pro look it over and see if it can be saved.
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|