apple pro problem with dvdr

[jasonkid]

ver 7 just finish install apple pro cdr boot fine 10/10 but dvdr have difficult time to boot what could be the problem im using ritek. thanks

[bighap]

Which boot method are you using? Make sure you use eject to turn on your ps2, not reset.

Method 1:
-Press EJECT button to switch on the machine.

-Insert PS2 game in tray.

-Tap RESET button once, the machine should reboot and then load your game.

Method 2:
- Press EJECT button to switch on the machine.

- Insert PS2 game in tray, the press EJECT button to close tray.

- The disc will then take 2-5 seconds to be recognized and then boot.

[jasonkid]

yeah i already done that, tried different media, still the same the boot rate would be 1/10 coud it be the ground wire cause i leave the ground really long. thanks

[LiquidCell]

I am guessing its either the laser or the way u burn discs, ie. what mdedia, do you do stuff on your computer while you burn and what speed do you burn at, try using a second ground wire.

[bighap]

Could be. It should be short as possible. Something is definatly wrong with the install though if you are using Ritek and the correct boot procedure. Fix that ground wire and see how things work then.

[jasonkid]

just test
cdr all boot
tenchu - fujifirm 10/10
chaolegion - ritek g03 can't boot
dynasty warrior tdk won't boot all the game that can't boot work on my ver7 dms3 any sugestion would be appreceate

[jasonkid]

apple pro picking on games or what? anyone?

[jasonkid]

apple suck?

[bighap]

Well isn't Tenchu a dvd? Could be that your ps2 doesn't like Ritek and TDK??? I only use Ritek and Verbatim on my v7 with apple pro and everything works fine.

[jasonkid]

i use ritek, tdk dvd movie it work fine. only the new game that won't work, anyway that what i get for being cheap. thank bighap