ALT +3.45 for V10
Does anyone know of any Alt 3.45 points on the V10. The DMS site points to a cap I believe next to a VIA. It is a little tougn to solder thicker wire to that point cleanly.
I am still battling with the black screen but I can hear the PS2 sound where the logo usually is. I have rerouted E and F flat agains the board with no success. Do they have to be apart from each other too?
I am getting ready to try the twisted pair with one end to ground on E, F and clock too.
Thanks for any help with this.
Orlando, FL :cool:
Use the one you want
You can use the 3.45V point you want from any chip. If you dont just trust me just check the point with a multimeter, they are electrically the same ;)
Black screen but sound?? That sound like a problem in your BIOS pin. Sometimes it has no solution. Stop working with your ps2 and get out the chip. Try to put it back to normal unmodded mode.
Then, try to install your chip again
It works just fine with the chip out....trying again.