Adjusting Coil Help for V4Gap with Magic 3.1
I installed the chip and check everything to make sure it correctly and no bridge between the pins. I can play the CD-R but not DVD-R. I went through other website and found the Adjusting Coil, so I tried to do that. The recommend for V4 is 1200-1400 Ohms, my ps2 is 726 Ohms so I adjusted it up to 1200 Ohms...wowow...It read the DVD-R disc but it won't play. Then I tuned it back to 800 Ohms but it didn't detect the disc like when i set 1200 Ohms.
Does anyone out there know how to adjust the Coil. I don't know if I did the right way adjusting the coil to make it detect the disc or I shouldn't have done this because it didn't detect my dvd-r rather than check on something else?