The above video goes away if you are a member and logged in, so log in now!
3 v10s - cd motor spins like crazy
3 v10s - cd motor spins like crazy –
I did 3 v10s , icerev, romeo mod and i get this:
the cd motor spins like crazy all the time.
-even when i remove the chip.
-i tried replacing the LB and the LA
I have a V10 GH-026 that won't spin at all. Did the romeo-mod and installed Ripper 2 Gold.
- Took out the chip, still won't spin....
- Fatter wire for romeo-mod, still won't spin...
- Back to 12v for LA, still won't spin...
It's a CDVD controller problem for sure. Had that several times, when users messed up VIA's or CDVD legs...
any good way to solder/desolder BGA chips??
If you soldered to the vias then make sure they are all still connected to their tracks because they burn off easily.
Check them with a multimeter.
Also make sure there are not shorts between the CDVD controller legs. Desoldering BGA's requires a rework station, using that desoldring can be done. A new part bfor the PS2 is (quite) hard to get, except from a working board... (or from a dead one which has other problem(s)).
your problem is :
You have CUT the lines down of cuting for ROMEO MOD.
In back of mobo.