3.45v Messiah 2 V7 PS2

**Sandmage** · 01-29-2003,04:31 PM

What kind of wire can i use for this spot. 22 gauge wire seems too big to solder on that resistor.

also will these kind of wires work.

- Insulated Wrapping wire (30 guage. solid conductor, kynar insulated) for all points except 3.45v and ground
this is the exact one
http://www.radioshack.com/product.as...5Fid=278%2D501

- Hookup Wire 22AWG (22 gauge, solid, 80C, 1/164" PVC, rated 300 volts) for +5v reset and ground

http://www.radioshack.com/product.as...Fid=278%2D1215

**Prelude** · 01-29-2003,05:11 PM

there is an alternate 3.45v point on the v7... give me a min, i will attach it for you, the 22awg wire can be soldered on to that easily.

**Prelude** · 01-29-2003,05:15 PM

here it is

**Sandmage** · 01-29-2003,05:25 PM

thank you Prelude

**Sandmage** · 01-29-2003,05:26 PM

also will the wires indicated above work or they are not recommended

**Bgnome** · 01-29-2003,05:30 PM

the wire wrap wire is fine.
22awg is a bit thick to work with, but will work also.

**villasg** · 01-29-2003,07:15 PM

For my a wire from flat cable ata 33 ( ide ) from pc is OK.
I use this for +v , scex , reset ( all caries voltage) and double for ground ( carrier all curent )

User Tag List

Thread: 3.45v Messiah 2 V7 PS2

Tweet

LinkBack

Thread Tools

Display


	Would you like to get all the new info from PSX-Scene in your email each day? Subscribe to our Daily Digest! Want to learn more about the team keeping you up to date with the latest scene news? Read about them now! Check out our Developer bios, too!