10000 with Japanese "Swap Magic"???

[Rotosound_rb666]

will it work? I have one of these monsters, that after repeated attempts to "re-flash" the p.o.s. DMS3 (best chip for this model, my ASS! NEVER DMS3 a 10000!) by demodding it, and demodding my U.S. v5, remodding the 5 with the DMS3, JUST TO RUN THE DAMN FLASH, then reinstalling the DMS in the 10000, over and over, until I buggered a trace, which caused the tray to not open anymore, the DMS3 NEVER worked on it, anyway, and it's on it's way to the landfill, exept for a charity case friend of mine wants a "FREE" (or really cheap) PS2, so since it's going to HAVE to be knife-swapped just to open it, if these are compatible with the Asian Swap Magic, that's as cheap as it gets, but someone PLEASE spare me any more headache on this, if Jap S.M. does'nt work on these, tell me now before waste time and money to buy a set of those, I know (close enough) where Bob ard found the panese mini-suberine the U.S.S. Ward put a shell hole through the conning tower of, on 12-7-1941, and I plan to give this junker a nice "Funeral At Sea", since that spot is consicered a Japanese National War Grave (Respectfully, opf course), anyway, it somehow seems comicly approppriate to command it to the deep, blue, sea, the next time I go deep-sea fishing..... it's on the way.

FINAL UPDATE:
Answering my own quetion, for the archives, for the benefit of anyone who might click that post looking for the answer, yes 10k's can use swap magic, it's the swap METHOD you have to be creative about.
I found my perfect 10k, a DTL-H 10000 Developer's Tool, that allows for everything everwanted out of one, without modifcation, and I'm enamored with it.

[HONGXING]

How much do you want for the unit?

[loy]

hehe i'll put the mother in and i'll make sure i'tll work if u want swap magic should work

[Rotosound_rb666]

I have four, now, 1, a GH001 I bought and ruined soldering, a GH003 I scored for parts someone else ruined soldering, bought another good GH003, and had it shipped fist to someone I know there who does beautiul work, as a price paid just to get that cdvd dhip done clean, with another $100 of DMS3, but it got to him with a spindle out of some newer one, with the low hub so the spinner wouldnt reach and it had super slip, but helol, I have 2 more right here for parts, so I had him solder and ship untested, I know his work is good (Fronline Modchips...Franks an ASRTISAN, his work is textbook photo model quality, I meanb, I do'nt know how he does it so neat) only to get a black screen seem the DMS3 the clowns around here all glorify has a version issues with those (you guys a re full of it, I wish I'd gone with the m2) that's only resolved by booting the upgrade flash using the original utilites disc, that I sure dont have, I came up with every flash EXCEPT the 1.6 that appearantly is the only one that works (Hell with dms3 and the 10k), but I was forced to remove the chip, and resolder it in my old-R every time, just flash it once, and solder it all back in to watch it mess up even worse, after the 3rd try, I burned a track up, and its never been right since.
on a lighter note, whilst buying old, dead 30ks to refurbish and mod (I dont care for the 50k) recently, at the last mintue I was given ("worthless") GJH001, never been molested with a soldering Iron, it had 2 fuzes blown to the fan (it actually worked when I powered it up..once) and now I assume needs BA5810FP, that my almost dms3s 003 has offered, but I'm out of soldering paste, that'll be my 2 weeks form now back burner project....
hell with em, I'm investing in a DTL-H10000 I'd rather remaster the few games I ever biother to play

[loy]

that suks

[Da Brass]

Jeez...I guess I must be the only one