v14 power light blinks once, dead after cc2.0
Installed a CC2.0 in my v14 this week. The bios check was fine, green light on the chip blinked once. Proceeded with rest of wires, then to the NEO XIV. at the test point for the NEO things went wrong. no power lights at all. Started checking fuses with a meter and the power light would come on when grounding the NEO to other places on the PCB. Redid the ground of the NEO, but the reset switch didn't act right, would not turn on consistently and would not stay glowing green. I finished the rest of the wires and unbridged teh NEO anyways, reassembled, but the power red light would not come on, and same thing, the green reset button light would come on for one second then go off. No disc spinning or laser activity at all. I have removed all the wires and the CC and the NEOFIX. Same problem. Reset gives me a green light for one second, nothing else. Double checked all the solder points. NO bridges. All fuses I can find check out ok. Seems like I fryed something, but I'm not sure what. Any suggestions?:chinscrat
Neofix off, board clean, bypassed fuse, still no go
I didn't have any fuses lying around, I know its a nono, but I simply jumper'd across the fuse. as noted before, it should normal continuity anyways, but still no red power light, green light won't stay on, no dvd activity at all, no video output at all.