The above video goes away if you are a member and logged in, so log in now!
System reset –
I just installed a 1.1 in a v14 and everytime the system starts up it proceeds to make me do the initial system configuration it won't detect memory cards and it won't boot any disks at all... if someone could shed some light on this like i soldered wrong or something that would be helpfull...
***also i made sure to connect all of the 3x3 and ground points on the chip to al valid location on the board and i was just making sure i had to connect them all for the chip to function properly but i didn't connect the SD ponit becaus eh the diagram didn't show it from the Crystall site
*** did something dumb but might help... i took it apart again and got to the chip... when the system starts up the chip led flashes once green the turns off and the system starts up... meh IDK some help please!!
Last edited by frostyfire03530; 01-11-2006 at 01:26 PM.