The above video goes away if you are a member and logged in, so log in now!
No audio/video after Install
No audio/video after Install –
I installed a CC 2.0 in my Slim V14c (GH-40-12), the BIOS install went by just fine, I plugged in the Ps2, powered it on and watched the LED, it blinked for only a second, so then I powered it off, the reset didn't work for some reason, and I had it wired up correctly, checked for cold joints and everything, so then I had installed the rest of the wires, CD/DVD data points, hooked it up to my tv after closing everything up and no video or audio! How do I find out what's wrong and fix the reset issue?
Any help's appreciated, Thanks!!!
P.S. There are no bridges on the CD/DVD Data Points, I made sure of that, I'm not sure about the BIOS, I'll take a closer look at that tomorrow when I'm free...
I didn't know about that, I'll try resoldering the W wire on then, everything else is fine, if that doesn't work, then I have no clue as to what is wrong, only thing I can think of is static discharge, but I was touching metal often...=/