The above video goes away if you are a member and logged in, so log in now!
chip seeds flashing i think m8, never used a CC but done Matrix etc etc read on there site or on here some real good guy's on here m8, they can help you better than me
The firmware that comes with the CC won't let you run backups. You need to download the hacked firmware(I don't remember a link. A google should do it.) before you can play backups.
But the chip should work. You should be able to boot everything but backups at this point, so you might want to check the soldering if you're just getting a black screen.
Black screen usually means bridged bios pins,check with a mag glass and multimeter
what do you mean bridged bios pins... you mean on the chip or the mobo?
on mobo check theses points, make sure non of the pads are touching
i read somewhere that said the wires cant touch the top metal part?
cover the heatsink with tape in the same place it sits abouve the chip.some ppl cover the chip with electrical tape your choise but check the bios pad connections also
im going to tape the wires down... can i tape it on any area of the board ? on top of circuits and junk?
also. maybe it has something to do with the grounding and power.... I made one wire to ground and one to 3v3 .. do I need to make multiple connections to additional grounds and power?
make sure you use slighty thicker wire for ground and power, or double the wire you used for chip connection assuming you used kynar or similar wrapping wire