The above video goes away if you are a member and logged in, so log in now!
Need some major help –
I've got a ps2 v12 GH-035 board and a CC 1.0
i desoldered the entire chip, installed a fuse where i broke the one before, booted it and it worked.
resoldered the chip, checked every connection many times for bridges, and to the proper pads on the chip, than checked and sprayed the board with an air-can.
now, plug in my ps2 the power light is not on.
open the lid - power goes into standby, i can turn on my ps2 and if i put in a CD it starts to read it but nothing happens i have no video or audio.
check the via point B, and F, G, H and I , it sounds like one them is touching out side of its circle. If your in the USA you can send the unit to me to look at