Latest ULE(4.12) Install Problems!

Hey guys! I recently d/l the latest ULE version(4.12)! I used my typical network setup to install the application to MC! To my surprise, ULE didn't load & instead went to the Sony MC's browser like I loaded up "PS2 Browser" instead of ULE! I am using the "Shutdown MM" in the PBT script instead of the "AUTOLOAD" due to problems reported with that script. I have tried installing ULE 3 different times & no luck with it working now from MC! I didn't try the "AUTOLOAD" script to see if that might work so I wanna know if anyone has tried installing the latest ULE(4.12) to MC to see if it's working properly! Thanks guys! :chinscrat

I just installed it here to MC with SHUTDOWN and it works fine. But it still has problems without SHUTDOWN.

best regards Jones23

Quote:

---

Originally Posted by Jones23

I just installed it here to MC with SHUTDOWN and it works fine. But it still has problems without SHUTDOWN.

best regards Jones23

---

Well, good to hear that! At least now I know it's not something extra with the scripts that need to be done! I do have the SHUTDOWN script so I don't know what's causing the problem! Here's what my PBT file looks like as has been the case recently:

#
# Application Manager Script for BootManager 2
#

# Change this information to describe the application.
SET "TITLE" "ULaunchELF"
SET "VERSION" "v 4.12"
SET "AUTHOR" "EP, Dlanor"
SET "DESC" "ULaunchELF is another popular dashboard replacement for the PS2."
SET "MEDIAS" ""
#

GOTO "$ARG1$"

:LABEL_NAME
ADDWIDGET "LABEL" "$ARG2$$TITLE$ v$VERSION$"
EXIT 0

:QUERY
ADDWIDGET "CALL" "$TITLE$" "$BM.TXT_VERSION$: $VERSION$ $BM.TXT_AUTHOR$: $AUTHOR$ $BM.TXT_DESC$: $DESC$" $ARG2$ "$ARG0$" "$ARG3$" "$ARG4$" "$ARG5$"
EXIT "0"

:INSTALL
IF FAIL COPY "$PWD$" "$ARG2$:/BM/APPS/ULELF"
MESSAGE "Failed installing $TITLE$!"
RRM "$ARG2$:/BM/APPS/ULELF"
RETURN -1
ENDIF
EXIT 0

:REMOVE
IF FAIL RRM "$PWD$"
MESSAGE "Failed removing $TITLE$!"
RETURN -1
ENDIF
EXIT 0

:RUN
SHUTDOWN "MM"
LOADEXEC "PBAT" "$BM.SCRIPTS$/LOADEXEC.PBT" "$PWD$/ULE.ELF"
EXIT "0"

See anything that might be wrong now Jones? This has been my script so don't know what to think here! Thanks again! :chinscrat

The script looks fine, make sure that you use the correct filename (ULE.ELF). Can't think of anything else.

best regards Jones23

Quote:

---

Originally Posted by Jones23

The script looks fine, make sure that you use the correct filename (ULE.ELF). Can't think of anything else.

best regards Jones23

---

I've got it working now! What happened is that I was using ULELF.ELF from the "Install" script but had only ULE.ELF in the SHUTDOWN script at the end! These two wasn't matching up exactly right! Thanks! Had me thinking again chip problems! Oh No! :shhh:

I thought so.;)
That's the reason why I never use different folder and filenames for my apps, it's just confusing.:p

best regards Jones23

Quote:

---

Originally Posted by Jones23

I thought so.;)
That's the reason why I never use different folder and filenames for my apps, it's just confusing.:p

best regards Jones23

---

What I had done was used another ULE(4.10) from another area of the hard drive & accidentally placed that into the application installation folder in which I had named ULE.ELF instead of ULELF.ELF to match the script! I really didn't use a different folder but I did have the wrong filename! Thanks! :D