The above video goes away if you are a member and logged in, so log in now!
help v12 cc.20 shorting out
help v12 cc.20 shorting out –
hi, I have my v12 I just modded with the cc.20 chip( already flashed)w/ the NeoFix XIV . It boots up fine, as long as I don't connect the lense unit. When I connect the lense's lens cable the ps2 no longer powers up( no red light). When I disconnect the lense cable, the ps2 powers up and boots seeing the cc2.0 with no problems. Can anyone help me out,don't know what could be wrong with it.
hi m8, if i was you i would make sure the 'K' wire from the fix is connected to resistor correctly,because when the laser is fitted and you ground k wire the ps2 will shut off this si what i do to test slim fix install etc..
make sure it isnt grounding against ic chip leg etc
Also the 'J' line for the neo fix XIV has two connection point. Each one has its one resister, J2 being a higher value then the other. Try J2 if you are on J1 right now.
thanks guys. Guess you were right sped, I changed the J line and it no longer shorts out. Unfortunately now I have another problem.
The ps2 can read ps1 backups(cdr's), and most ps2 backups. I tried a few disks out and for some reason it can't read dvd-r disks(tried memorex and verbatim), it can read dvd+r disks. and I have one official ps2 game that causes bootmanager to just keep rebooting. Also if I put the dvd-r disk in the ps2, bootmanager just keeps reloading.
(I am using the r29 firmware with 2.0.6 bootmanager) I've tried the disks in my friends v12 and his system loads it perfectly.
Any ideas why this might be happening?
Update, problem solved. In case anyone was wondering or had the same problem, it was the laser. I adjusted the dvd laser pot and now it reads every disk I put in it.
Last edited by solid~snake; 03-24-2007 at 02:55 PM.