The above video goes away if you are a member and logged in, so log in now!
Crystalchip in gh037 bad bootrate?
Crystalchip in gh037 bad bootrate? –
A v14 gh037 with a problem
Any one have a clue what coulkd be wrong?
First full bootrate then when intro is on on (SSX) for 10-15min then the machines hangs.
Then the machine gets warm and the botrate goes down to maybe 70% then it goes even lower to 50%.
The discs works in other machines but are a bit scratched.
Could the scratched disc cause the heating problem leading to a overheated cc1.1 and then the bootrate will go down?
The chip is placed under the right controllerport.
I made 2 installs (changed location of chip + changed to new chip)with same problem and no friend that can look at the install :/
Thanks in advance
Hahahha i fixed it bymyself
The v14 seems to have a litle bit worse laser than the rest of the ps2:s. When i use my newly burnt soulcalibur3 (Mitsubishi-r)the bootrate is up to 100% and not as hot as it was when i used scratched media. I also chanbged the power wire to standard kynar instead of the thicker one, and used all screws for the metalshielding of the motherboard. Now i can finaly go to sleep
Anyone else has readig difficulties with v14?