CC1.0 not upgrading
I have a CC1.0 that I have installed in many different ps2s all with the same result.
After the chip is installed there is a black screen.
I power up the console and then quickly tap reset 3 times to get video/audio.
Then the chip picks up the flash disc in the machine and I get the upgrade screen.
I click upgrade firmware and the chip flashes.
Once it says done I turn off the ps2 and put a burned dvd game in.
Once again we have black screen on bootup.
Every one of these ps2s worked perfectly once I installed a different chip.
I had 10 cc1.0 chips and this is the only one that has had this problem.
Anyone know what this problem is?
are you using the hacked fermware ??
Used hacked and original firmware and even downloaded different ones.
Tried 18 and 19.
take reset 6 or 7 times when you turn on the machine then try to reflash.
I know there was a few chips that doesn´t work in V7 and higher.And yes try a FW 1.4 or lower.