The above video goes away if you are a member and logged in, so log in now!
Black video on V16 ( GH-040-02 )
Black video on V16 ( GH-040-02 ) –
i've installed crystal chip 1.1 but when turning on play the video is always black. I've check all soldering but are ok. Someone could help me?
we need more info.. such as did you flsh the chip do you get any video or dose it hang on black after ps2 logo?
i can't flash my chip because play reed no disc, no logo... always black
bridged bios points splatter or wires in rong place. recheck all wires and clean any bad joints. still cant get it to work remove all wires from board and chip and cleen all solder points.
yeah something is for sure wrong with your install.
Double check the W point this is usually the problem
i have the same problem with a myth chip. black screen on startup.. even after i removed the chip no good!
can anyone help me?
and check you placement of the chip, sometimes incorrect placement can cause preasure on the chip and it will give you black screen. If you're really carefull you can try start it without any of the protectionplates on the motherboard