The above video goes away if you are a member and logged in, so log in now!
bad V7 install please help!!!
bad V7 install please help!!! –
hey guys, i am udgrading to a CC from the old school magic V, I had the magic working awsome, never ever had a problem with er... I installed the CC and now my machine will not turn on with the reset button, it will go on no problems with the eject button but with no picture, i see a very quick flash and thats it... can someone please let me know if this is a wire problem, if so which wire i should be looking at, i do know that there are wires that you cannot cross, i think that its the R wire, i ran this wire off to the side away from everything... no wires except the ground and power are crossed, but even still it should still boot up normal, Right ? it would just not let the chip turn on?? if someone could please please please help me out with this, that would be awsome!!! thanx in advance, Ringer
crossed wires is not an issue with the crystal chip , if you aregetting a black screen make sure you have no solder bridges on the bios / pinched wires between the case . or anywhere else for that matter and all of your wires are going to the correct place .
did you use the same wires as the magic v ??
some points are different on the cc mod
can you post a picture of the install ?
a pro installer in the netherlands
nope i used diff wires, took everything off the MB and cleaned and fluxed it, then re modded it, i have always used magic chips, this is my first install with a CC, ne tips would be AWSOME... thanx for the help so far, i havent been able to re do the whole thing yet, never had the time, im gonna get to it ASAP, I wanna sell it when im done, I just bought a new slim so i dont need it anymore, so if ne you guys or gals interested let me know....
hey i tried to upload pics, is there a certain way to do this... I went to upload and everything and they will not show up