The above video goes away if you are a member and logged in, so log in now!
after installing cc v1.1 the cd/dvd doesn t boot please help me
after installing cc v1.1 the cd/dvd doesn t boot please help me –
I buy and install my crystal chip v.1.1. I chech and double check for sort cuts, loose wires and everything is ok.
I powered up the ps2 the diagnosis led on my cc glows only once the ps2 start i saw the original ps2 screen but the laser doent move at all.
Nothing. The laser doesnt goes up down trying find cd, neither the laser head moves, neither the motor how spin the cd move not at all.
Is like no command goes to the laser to start reading a disk.
I have the ps2 slim v14 gh 0-40-02
PLEASE HELP ME.
WHAT SHOULD I DO???
CAN I FIX IT????
Thanks i advance
you might have accidentally shorted out the drive motor ic(worst case) or just might have a blown fuse. Check the fuses.
|Maximus AVR USB - $9.99
|Maximus NandFlasher - $34
I got both your PM's and thought it would be best to reply here.
Make sure the two security switches are depressed or the laser and motor will do nothing. Also check all your ribbon cables for damages and that they are seated correctly. If none of that helps test the fuses also.
Thanks you very much indoweed.
Thanks you very much spedmetal.
SPEDMETAL once again sorry for the PM s. The are two segurite swithes????
Not only one????? I thought it was only one black buton at the back. I ll check for the other.
I have pull out the chip and still nothing. I cleaned the soldered points with alchool. I have check twices all the fuse and the resistances in both side of the mothermord and all is ok.
Is possible to blow the ic controler of the laser with out blow any fuse or resistance?????
Where is located the ic controler of the laser?????can you provid me some pic or to tell what is writen on it?????
If the ic is burned, blowed is t possible to replace it by my self or not????
Thank s you once again in advance for your time.
Spedmetal you where soo right.
I haven t notice that was 2 securite switches on the laser.I only depressed the one.
My ps2 works fine with out the ccv1.1 now!!!!
I ll install it again tomorrow!!!
Thanks you again!!!
Also indoweed thank you very much for your help too!!!
Good job man!
Take your time with the reinstall.
Spedmetal you are the expert. Jones 32 was right. You are the best modder kai mod installer.
I re install the chip and like magic everything is ok!!!!
The crystal chip is really awsome. I am glad because i bought cc and not the crapy dms 4 pro!!!
Thanks you again for the advice.
Power and respect to spedmetal.
wow thanks! Glad you got it working in the end.