The above video goes away if you are a member and logged in, so log in now!
yellow dot for v13? –
I am getting a friend to install a matrix infinity in my slimline v13 console. All the wiring is correct but it wont boot any backups, The chip sent to me is a yellow dot MI original ( not a clone) - Is this incompatible with v13 ( it doesn't want to flash either) or is it perhaps a faulty chip?
Thx for any help.
yellow dot should work but need to be reflashed 2 a newer firmware
but the only way you could do it is with a memorycard because the yellow dot can't boot a upgrade disk with the old firmware
so you need a preinstalled memorycard made on a other ps2/pstwo
all instructions can be found here on the infinitysite
MABCOM a Pro installer in the netherlands
Thx for the help.
Just reading inside the zip file - it mentions compatiblity with v12 consoles but not v13 or above. Should this still work with v13?
12 and 13 are basicly the same apart from the laser fix. but v14+ are difrent