v9 i just get the matrix logo and nothing els

**silviano** · 12-30-2005,12:00 PM

hi
i just instal the MI in a v9 PS2
and al im getting is the logo of matrix
it doesnt boot any further

does any one know what im doing wrong?

thnx

**ZootAllures** · 12-30-2005,02:10 PM

Try plugging in the controller in port one then boot disk

**silviano** · 12-30-2005,07:00 PM

did that but the matrix logo will not go away

**kenzone** · 12-30-2005,07:56 PM

have u left a disk in ?

**l_oliveira** · 12-30-2005,08:14 PM

do this:

1- Check power going to the MI chip. Wires thicker than the normal wires are a good idea as the chip will get more power for the patching.

2- Check bios wires. M,N,... V wires. R and W are special and are used by the mod to know when the PS2 is reading the bios or to receive updates during the flashing. Actually the data flow through M,N ... V wires but if W and R are not ok the mod will not know when to patch. Other important thing is the clock wire (Y) check it too. MI is not very sensitive to a bad wiring, but if the wiring is not good, you will have trouble soon or later ...

**silviano** · 01-02-2006,12:17 PM

thnx de problem was indeed the wiring of M

User Tag List

Thread: v9 i just get the matrix logo and nothing els

Tweet

LinkBack

Thread Tools

Display


	Would you like to get all the new info from PSX-Scene in your email each day? Subscribe to our Daily Digest! Want to learn more about the team keeping you up to date with the latest scene news? Read about them now! Check out our Developer bios, too!