So I'm having some major issues with my V12 Martix Infinity install. All of the wires installed look perfect. I am working from this install diagram: http://www.modchip.com/installpics/m...ty/USA-V12.jpg
My MI chip has the greenish/ blue dot in the upper left hand corner. Also note that this is the second attempt at soldering this in with no luck. During the first install attempt, I accidently broke the component off that wire SX gets soldered to. I gave up after that and removed all of the wires so far. After closing up the PS2 and powering on it worked no problem (going on 6 months now) even with the component missing. The second time I attempted the install (this time) no picture or sound comes on after I power the system on. The LED does turn green however. After the system hangs and I reset, the system turns on for only a second or two then shuts off (still with no picture or sound). Does this have to do with the missing component at point SX?
I then opened up the PS2 again and tried bridging the point SXto fix it. Still nothing. Does that component that fell off of the board need to be replaced? If so what is it and where do I get one? If not where could my problems be rooting from?