The above video goes away if you are a member and logged in, so log in now!
problems with infinity matrix green dot
problems with infinity matrix green dot –
i've installed a matrix infinity green dot on a v7 pal ps2
(scph-39004) which was previously modded with a titan sx.
now i get distorted audio in the browser and the logo
(sounds like metallic), crackling sound in psx games,
and i can't read dvds!
what could be the problem?
just another thing, motherboard is a v7, and three feet are
missing from the bios, like a v3... is it normal?
thanks in advance... and sorry for my english.
Last edited by cuoco; 12-13-2005 at 01:49 PM.
Reason: adding info
I can only say, check the soldering for shorts.
Do you have equipment to test that ?
Does the ps2 work, without modchip ?
ther is briging on your bios even your multi meater might not pick it up. Remove all bios wiers lay down alot of flux and use you desoldring braid(wic) and get all solder of the pins then get a small amount of solder and touch each pin that you solder to at the base. reinstall wiers and you shuld be up in running
there seems to be a short between O and the pin between O and P...
i've checked it with the ohmeter and it says 0,05 ohms, so it's a short...
is it normal? but there seems to be nothing, and cleaning doesn't work...