Problem with Infinity on PS2 V13

[tomit12]

Here's my prob:

I bought and installed a Matrix Infinity (green dot from modchipstore.com) in my PS2 slimline V13. There was a little trial and error with getting it working / getting the soldering right, but I'm finally at the point that the when the PS2 powers up it shows the Matrix logo.

I can get to the config screen and that all works ok. It also boots PS1 and PS2 original discs with no problem. Trouble is, it won't boot burned...anything. I made a firmware update CDRW and that will only boot if I hold Circle while booting (but it did boot and I was able to update the firmware to the latest version). If I don't hold circle it won't boot, it just takes me to the screen asking me to insert a PS1 or PS2 formatted disc.

When I try to play a PS2 backup, it won't work at all (even trying the circle thing). Just goes to the 'insert a PS1 or PS2 disc' screen. Any ideas?

[mabcom]

for sure that you have to check your DVD controller points
A,B,I and G if you have a NTSC version you also have to include the H wire

If one of those is missing or wrong installed you get a RSOD
Bios points are RIGHT because you can see the Matrix logo and settings

good luck with troubleshooting

MABCOM

[EspeN]

Very good advise from MABCOM there.
The error is located where he points you, if you havent burned the game completly wrong though.. But chances for that is very limited