Matrix mxl2 problem

[lapollarecord]

These are the features of matrix mxl2 , writen on his own website :

MATRIX MXL2 Details:

Compatible with Playstation 2 PAL V1, V3, V3, V4, V4R, V5, V6, V7, V9, V10


Easy to Install, only 18 wires for V1-V7 and 19 wires for V9, V10


ACTEL based IC for enhanced stability


AUTOMATIC "MACROVISION=OFF" ON ALL PS2 FROM V1 TO V10 WITHOUT ADDITIONAL WIRES !!


AUTOMATIC "GREEN FIX" (No more need to change the cable to see your DVD movies on the PS2!!)


Supports games on DVD-9 media !!


Jumper less (Automatic Version detection)


Import Games Fix (All PSX NTSC import games are played at FULL SCREEN and FULL COLOR !!)


STEALTH-Mode (The Modchip can be switched off and becomes invisible to Online Gaming)


100% NO SWAP (Direct boot for all the PS2 and PSX games)



PLAYS ALL THE CD?S and DVD?S Games (both, Import or Backup?s)


SUPPORTS MULTI-DISK GAMES !!


Sleep-Mode (The Modchip will switch off itself after boot)


Very Reliable (All the Modchips are 100% tested before delivery)


Very Stable (Thanks to the sleep mode the IC will never Overheat)


CD Lens Safe (Avoid CD lens damage by sending un-necessary signal to the Drive Controller)
--------------------------------------------------------------------------

Ok , i have it installed in my ps2 , and i wanna ask about this :
Sleep-Mode (The Modchip will switch off itself after boot)
Really ? i tryed a lot of times play in internet and always detect the modchip and crash ps2 dna´s ( not the game´s Dnas ).

So , its anythink i can do for play whitout switch it off ? ill like tho play non originals whit dnas patched.

[samuraitux]

okay, sleep mode doesn't really turns off the mod chip but it turns the mod chip on only when the mod chip needs to do something. DNAS checks the PS2 hardware and software to see if the PS2 is not modded and if it is a legit copy. That's also why you need to disable the mod chip before playing online with a legit copy since DNAS checks the hardware. There are patchs to bypass DNAS but they need to be applied before burning the backup copy. You can google that by typing like "PS2 playing online games mod chip" or something like that. btw, You can disable the modchip by pressing start (for MI).

[lapollarecord]

You can disable the modchip by pressing start (for MI).

Explain to me detailed plz

[samuraitux]

you don't have a Matrix Infinity (or MI) modchip but if did you would have to hold START button on the PS2 controller to disable it.
Anyway this is an MXL2 problem so to disable it you need to do the following:

DISABLING MXL2 (Stealth Mode).
With the PS2 on standby position (red light ON), press the reset button and keep pressed until the blue light turns ON.
Release reset button and press again within two seconds.

The MXL2 is now completely disabled and transparent to the system until the PS2 is brought back in standby (red light ON).

This will disable it and would let you play online games ONLY if you have a legitimate copy. To play backup games online, you need to patch it before burning it but research that using google. btw, here the link for the instructions of the mod chip:
infinitymod.com/cgi-bin/matrix/site.pl?page=chip_mxl2

[lapollarecord]

i have been searching for it , but no one talks about " modchip detection " all webs talks about how to patch the games , but NOT how to do for play that games on a ps2 whit modchip installed.

If u knowh anithing , please tell me .